Blue Rhino SV3100 User Manual

Page of 8
Outdoor LP Gas Mosquito Exterminator  Model No. SV3100
End of Season Storage
To lengthen the life of your SkeeterVac
®
 device, perform these simple steps at the end of the 
mosquito season.
1. Turn valve on LP gas tank “OFF”.
2.  Disconnect regulator/hose assembly from tank by turning knob counterclockwise.
3. Remove tank cover.
4.  Remove LP gas tank and store outdoors away from children and must not be stored in a 
building, garage or other enclosed area.
5.  Remove and properly dispose of the TacTrap™ and FineTune
®
 lure.
6.  Cover your SkeeterVac
®
 device to protect from dust and store it in a cool dry place.
  CAUTION: Storage of an outdoor gas appliance indoors is only permissible if the tank 
is disconnected and removed from the outdoor gas appliance. 
Product Registration
For faster warranty service, please register your product immediately at www.bluerhino.com or 
call 1.800.762.1142.
Limited Warranty
Blue Rhino Global Sourcing, Inc (“Vendor”) warrants to the original retail purchaser of this 
product, and to no other person, that if this product is assembled and operated in accordance 
with the printed instructions accompanying it, then for a period of one (1) year from the date 
of purchase, all parts in such product shall be free from defects in material and workmanship. 
Vendor may require reasonable proof of your date of purchase. Therefore, you should retain 
your sales slip or invoice. This Limited Warranty shall be limited to the repair or replacement of 
parts, which prove defective under normal use and service and which Vendor shall determine 
in its reasonable discretion upon examination to be defective. Before returning any parts, you 
should contact Vendor’s Customer Service Department using the contact information listed 
below. If Vendor confirms, after examination, a defect covered by this Limited Warranty in any 
returned part, and if Vendor approves the claim, Vendor will replace such defective part without 
charge. If you return defective parts, transportation charges must be prepaid by you. Vendor will 
return replacement parts to the original retail purchaser, freight or postage prepaid.
This Limited Warranty does not cover any failures or operating difficulties due to accident, 
abuse, misuse, alteration, misapplication, improper installation or improper maintenance or 
service by you or any third party, or failure to perform normal and routine maintenance on 
the product as set out in this owner’s manual.  In addition, the Limited Warranty does not cover 
damage to the finish, such as scratches, dents, discoloration, rust or other weather damage, 
after purchase.
This Limited Warranty is in lieu of all other express warranties. Vendor disclaims all warranties 
for products that are purchased from sellers other than authorized retailers or distributors, 
including the warranty of merchantability or the warranty of fitness for a particular purpose. 
VENDOR ALSO DISCLAIMS AND ANY ALL IMPLIED WARRANTIES, INCLUDING WITHOUT 
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. VENDOR SHALL NO LIABILITY TO PURCHASER OR ANY THIRD PARTY FOR ANY 
SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Vendor further 
disclaims any implied or express warranty of, and assumes no responsibility for, defects in 
workmanship caused by third parties.
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other 
rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or 
limitation of special, incidental or consequential damages, or limitations on how long a warranty 
lasts, so the above exclusion and limitations may not apply to everyone.
Vendor does not authorize any person or company to assume for it any other obligation or 
liability in connection with the sale, installation, use, removal, return, or replacement of its 
equipment, and no such representations are binding on Vendor.
Blue Rhino Global Sourcing, Inc
Winston-Salem, North Carolina USA
(800) 762-1142
Troubleshooting
Problem
Possible Cause
Prevention/Cure
Engine will not light
Igniter does not work
Check battery; replace if 
necessary
No LP gas
Check LP gas tank; replace if 
necessary
Hold in control knob for 30 
seconds.  If it still does not 
light, please call customer 
Care.
If problems can not be correct by using these methods, please contact  
1.800.762.1142 for assistance.
Cleaning and Care
  CAUTION: All cleaning and maintenance should be done when SkeeterVac
®
 is cool 
and with the fuel supply disconnected.
 CAUTION: DO NOT clean any SkeeterVac
®
 part in a self cleaning oven. 
  CAUTION: This SkeeterVac
®
 should be thoroughly cleaned and inspected on a regular 
basis.
 CAUTION: Abrasive cleaners will damage this product. 
Before Each Use:
1.  Keep the SkeeterVac
®
 area clean and free from any 
combustible materials, gasoline, and other flammable 
vapors and liquids.
2.  Do not obstruct the flow of the combustion of LP and the 
ventilation air.
3.  Keep the ventilation opening(s) of the LP gas tank area 
free and clear from debris.
4.  See “Cleaning Instructions” for proper cleaning 
instructions.
Cleaning Instructions / Routine Service
To ensure maximum performance and to lengthen the life of your SkeeterVac
®
 device, perform 
these steps each time your tank is empty. This model will consume a standard 20# LP gas 
tank every 18-21 days.
Note:  While unit is in use, check the following every 2-3 days: 
• Check WaveDrawer
®
 and clean (if necessary). 
• Check air passages for blockage.
1.  Turn LP gas tank valve “OFF”.
2.  Disconnect hose/regulator gas line from tank by turning knob counterclockwise.
3.  Remove empty tank replace with full LP gas tank.
4. Slide WaveDrawer
®
 cover onto WaveDrawer
®
.
5.  Remove WaveDrawer
®
, empty and clean.
6. Slide WaveDrawer
®
 back into place.
7. Remove WaveDrawer
®
 cover.
8.  Remove used TacTrap™ and dispose of properly.
9.  Slide fresh TacTrap™ in place and remove protective paper.
10. Remove Finetune
®
 cover by turning counterclockwise.
11.  Remove used Finetune
®
 lure (if necessary) and properly dispose. 
Note: Finetune
® 
Lure lasts 60 days.
12.  Remove fresh Finetune
® 
lure from package (if necessary). Dispose of packaging properly.
13.  Place Finetune
®
 lure back into holder with holes orienting upward.
14.  Replace Finetune
®
 cover.
15. Select the lure output by adjusting the Finetune
®
 cover.
16.  Check engine and gas lines for any sign of damage or missing parts. Repair any problems 
before attempting to start.
17.  Reconnect gas line to LP gas tank by turning knob clockwise.
18.  Remove tank cover from empty LP gas tank and place on full LP gas tank.
19. Perform leak check.
20. Start following “Lighting” instructions.
21. Wash hands with soap and water.
Replacing Igniter Battery
If you do not hear a clicking sound when the igniter 
button is depressed, the battery may have lost its 
charge. Replace battery as follows:
1.  Turn LP gas tank valve “OFF”.
2.  Open battery compartment by turning cap on 
bottom of engine counterclockwise.
3.  Remove used battery and properly dispose.
4.  Place fresh AA battery into compartment –  
negative (–) end goes in first.
5. Secure cap by turning clockwise until it stops.
6. Start following “Lighting” instructions.
Battery Placement
LP Gas Tank Ventilation Area