Blaupunkt VW / AUDI 7 607 545 550 User Manual
25
ENGLISH
We provide a manufacturer's warranty for
our products purchased within the European
Union. You can view the warranty terms at
www.blaupunkt.de or request them directly
from:
our products purchased within the European
Union. You can view the warranty terms at
www.blaupunkt.de or request them directly
from:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Safety notes
Before drilling holes for mounting, ensure that
no routed cables or vehicle components are
damaged!
no routed cables or vehicle components are
damaged!
Do not install the USB socket, microphone and PTT
button in the deployment area of the airbag, and
ensure that the tray is safe and solid so that passen-
gers in the vehicle are not at risk during emergency
braking. Use cable glands for holes with sharp
edges.
button in the deployment area of the airbag, and
ensure that the tray is safe and solid so that passen-
gers in the vehicle are not at risk during emergency
braking. Use cable glands for holes with sharp
edges.
The negative terminal on the bat-
tery must be disconnected while
the device is being installed and
connected.
tery must be disconnected while
the device is being installed and
connected.
Observe the safety notes from the vehicle manu-
facturer (airbag, alarm systems, on-board com-
puters, immobilisers).
facturer (airbag, alarm systems, on-board com-
puters, immobilisers).
Recycling and disposal
Please use the return and collection systems avail-
able to dispose of the product.
able to dispose of the product.
Declaration of conformity
The Blaupunkt GmbH declares that the Bluetooth/
USB Interface device complies with the basic re-
quirements and the other relevant regulations of
the directive 1999/5/EG.
USB Interface device complies with the basic re-
quirements and the other relevant regulations of
the directive 1999/5/EG.
Dear customer,
the fi rmware
"SW8C01VW" for the Bluetooth USB
interface (BT-USB interface, 7607 545 500 001)
is now available and provides several new func-
tions that we would like to explain below.
is now available and provides several new func-
tions that we would like to explain below.
A signifi
cant innovation since SW8625VW
is the
support for the OLED display
(7 607 548 500 001).
Caution:
Before startup of the OLED display, it is nec-
essary to update the fi rmware of your BT-USB
interface (see the
essary to update the fi rmware of your BT-USB
interface (see the
(see the section Software update).
Software update).
The following instructions assume that the
fi rmware of your BT-USB interface has already
been updated, and the language was set to English
(see the section Settings menu).
fi rmware of your BT-USB interface has already
been updated, and the language was set to English
(see the section Settings menu).
This fi rmware can also be used with your PTT like
the previous versions. The OLED-specifi c control
and display options listed below are not available
in this case.
the previous versions. The OLED-specifi c control
and display options listed below are not available
in this case.
Switch-on
The OLED display switches on
automatically as
soon as you switch on your radio or radio naviga-
tion device (RNS).
tion device (RNS).
Switch-off
The OLED display switches off
automatically as
soon as you switch off your radio or radio naviga-
tion device (RNS).
tion device (RNS).
You can also switch off the display
manually; to
do so, press and hold the
red phone button for
longer than
5 seconds. The buttons remain illumi-
nated to improve navigation at night.
In the "Display -> Standby" Settings menu, you
can
can
preselect a time after which the display au-
tomatically switches off with switched-on radio,
e.g. to reduce a possible distraction of the driver.
e.g. to reduce a possible distraction of the driver.