Black & Decker LSW36B User Manual

ASSEMBLy

NOTE: Ensure the sweeper is switched off and the battery is

removed before attaching or removing the sweeper tubes. The

tube assembly must be assembled to the housing before use.

• TUBE ASSEMBLy: To attach the inner tube to the sweeper, line

up the tube with the sweeper housing as shown in figure D. Push

the tube into the sweeper housing until the lock button engages

the lock hole in the tube. Repeat this process for the outer tube.

OPERATION

always wear safety glasses. wear a filter mask if

the operation is dusty. use of rubber gloves and

substantial footwear is recommended when working

outdoors. for household use only.

warning:

cut hazard. When turning the tool off for tube

installation or any other reason, wait 10 seconds for the fan to stop

rotating before disassembly.

• Always switch off and remove the battery when:

• The power supply cord has become damaged or entangled.

• You leave sweeper unattended.

• Checking, adjusting, cleaning or working on sweeper.

Use sweeper only in daylight or good artificial light.

switching on and off (figure e)

WARNING:

USE BOTH HANDS TO GRIP THE PRODUCT

FIRMLy WHEN SWITCHING ON.

To switch the sweeper on, slide the on/off

switch forward.

To switch the sweeper off, slide the on/off

switch back.

CAUTION:

DO NOT POINT UNIT

DISCHARGE AT SELF OR BYSTANDERS.

power command (figure f)

MAX POWER / MAX RUNTIME

The max power / max runtime feature

(F1) is located on the tool handle.

It allows you to optimize the tools

performance and boost the power as

needed.

• To choose max power, rotate dial to

setting 6.

• To maximize runtime rotate dial to setting 1.

• For a combination of both, rotate dial to setting from 2 to 5.