Black & Decker Edger LST220 User Manual

20V MAX* lithiuM tRiMMER / EDGER

iNStRuCtiON MANuAl

KEY iNFORMAtiON YOu ShOulD KNOW:

• The guard must be installed before trimming or edging - if

not, the motor will overheat (page 8).

• When replacing the line, use only .065 inch diameter

ROUND line (B&D Model #AF-100 is recommended) -

otherwise the tool will not function properly (page 10).

• Do not bump the feed head against the ground - it will

disrupt the feed mechanism.

*Maximum initial battery pack voltage

(measured without a workload) is 20

volts. Measured under a workload,

nominal voltage is 18.

Model # lSt220

SAVE thiS MANuAl FOR FutuRE REFERENCE.

VEA El ESPAÑOl EN lA CONtRAPORtADA.

POuR lE FRANÇAiS, VOiR lA COuVERtuRE ARRiÈRE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO

Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE

INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

thank you for choosing Black & Decker! Go

to www.BlackandDecker.com/NewOwner

to register your new product.

Model Number lSt220

PlEASE READ BEFORE REtuRNiNG

thiS PRODuCt FOR ANY REASON:

If you have a question or experience a problem with your

Black & Decker purchase, go to

WWW.BlACKANDDECKER.COM/iNStANtANSWERS

for instant answers 24 hours a day.

If you can’t find the answer or do not have access to the internet,

call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri

to speak with an agent.

Please have the catalog number available when you call.