Siemens Euroset 5020 S30350-5209-D803 User Manual

Product codes
S30350-5209-D803
Page of 45
euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006
3
GB
Activating/deactivating handsfree talking
With this telephone you can also make calls (handsfree 
mode) or settings without lifting the handset. The best 
distance from the microhone for speaking is about 50 cm.
Activating during a call via the handset
L
 + 
a
With the Loudspeaker key pressed replace the 
handset.
Activating before dialling the number
L
Before dialling: hold down the Loudspeaker 
key until you can hear the dialling tone.
Deactivating handsfree talking
c
Lift the handset during the call.
Last number redial
The last 5 numbers dialled (up to 32 digits) are saved 
automatically. You can retrieve these numbers from the last 
number redial list and dial them again:
Redialling the last number dialled
c;
Lift the handset and press the last number 
redial key. The last number dialled is redialled 
immediately.
Dialling from the last number redial list
;
Without lifting the handset: Press the last 
number redial key.
The last number dialled is displayed. (You can 
leave the last number redial list at any time by 
pressing 
>
.
)
A
...
C
Using the Down/Up key, scroll through the list 
to the desired number.
B
Press OK or 
L
 key.
After 2 seconds the number is dialled. 
Lift the handset if you want to talk via the 
handset.
Dialling using the repertory keys
c
Lift handset. (If necessary, press 
=
 for a 2nd 
level repertory key).
:
Press repertory key.
or ...
:
Press repertory key. (If necessary, press 
=
 for 
a 2nd level repertory key).
Bc
Press OK or 
L
 key.
After 2 seconds the number is dialled. 
Lift the handset if you want to talk via the 
handset.
Saving numbers
Different telephone settings must be completed with the 
Set key 
?
 so that they are available permanently. 
In order to cancel without saving, e. g. after an incorrect 
entry, replace the handset instead of pressing 
?
 at the 
end. The original setting is then retained.
Saving with notebook function
You can also save phone numbers during a conversation 
with the notebook function.
Saving repertory numbers
You can save up to 20 phone numbers (or even functions, 
see page 7) on both levels of the repertory keys. 
?
Press the Set key. (For 2nd memory level, also 
press 
=
.)
:
Press the repertory key under which you want 
to save the repertory number.
A number that has already been saved is 
shown in the display. If the memory for this 
repertory key is empty, z appears in the display 
Enter the number to be saved (up to 32 digits).
or ...
Saving from the calls list
 (if service is available)
A
...
C
Press the Down/Up key until the desired 
number appears in the display.
or ...
Saving from the redial list
:
;
Press the last number redial key.
A
...
C
If necessary, press the Down/Up key until the 
desired number appears in the display.
To terminate the process:
?
Press the Set key.
Saving during a call
You can also save phone numbers in the same way during a 
call (notebook function).
Delete all repertory numbers
?1251
Initiate function.
?
Press the Set key.
Note: 
After the 20th digit, any following digits are moved from right to left 
in the display.