Intel Pentium 4 530 3.0GHz HT LGA FSB800 1MB BX80547PG3000E/BOXD915PBLL User Manual
Product codes
BX80547PG3000E/BOXD915PBLL
Intel Desktop Board D915PBL Technical Product Specification
36
1.12.1.1
System States and Power States
Under ACPI, the operating system directs all system and device power state transitions. The
operating system puts devices in and out of low-power states based on user preferences and
knowledge of how devices are being used by applications. Devices that are not being used can be
turned off. The operating system uses information from applications and user settings to put the
system as a whole into a low-power state.
operating system puts devices in and out of low-power states based on user preferences and
knowledge of how devices are being used by applications. Devices that are not being used can be
turned off. The operating system uses information from applications and user settings to put the
system as a whole into a low-power state.
Table 7 lists the power states supported by the board along with the associated system power
targets. See the ACPI specification for a complete description of the various system and power
states.
targets. See the ACPI specification for a complete description of the various system and power
states.
Table 7.
Power States and Targeted System Power
Global States
Sleeping States
Processor
States
States
Device States
Targeted System
Power
Power
(Note 1)
G0 – working
state
state
S0 – working
C0 – working
D0 – working
state.
state.
Full power > 30 W
G1 – sleeping
state
state
S1 – Processor
stopped
stopped
C1 – stop
grant
grant
D1, D2, D3 –
device
specification
specific.
device
specification
specific.
5 W < power < 52.5 W
G1 – sleeping
state
state
S3 – Suspend to
RAM. Context
saved to RAM.
RAM. Context
saved to RAM.
No power
D3 – no power
except for
wake-up logic.
except for
wake-up logic.
Power < 5 W
(Note 2)
G1 – sleeping
state
state
S4 – Suspend to
disk. Context
saved to disk.
disk. Context
saved to disk.
No power
D3 – no power
except for
wake-up logic.
except for
wake-up logic.
Power < 5 W
(Note 2)
G2/S5
S5 – Soft off.
Context not saved.
Cold boot is
required.
Context not saved.
Cold boot is
required.
No power
D3 – no power
except for
wake-up logic.
except for
wake-up logic.
Power < 5 W
(Note 2)
G3 –
mechanical off
mechanical off
AC power is
disconnected
from the
computer.
disconnected
from the
computer.
No power to the
system.
system.
No power
D3 – no power for
wake-up logic,
except when
provided by
battery or external
source.
wake-up logic,
except when
provided by
battery or external
source.
No power to the system.
Service can be performed
safely.
Service can be performed
safely.
Notes:
1.
Total system power is dependent on the system configuration, including add-in boards and peripherals powered by the
system chassis’ power supply.
system chassis’ power supply.
2.
Dependent on the standby power consumption of wake-up devices used in the system.