Biostar K8T890-A9 Owner's Manual
K8T890-A9 BIOS Setup
34
CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking
Special Notice:
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON”
status. All the CMOS data will be loaded as defaults setting.
status. All the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor.
It’s strongly recommended to set CPU Vcore and clock in default setting. If the
CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage.
CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage.
Async AGP/PCI CLOCK
This item allows you to select Async AGP/PCI clock.
The Choices: Disabled (default), 66.0/33.0MHz,75.4/37.7 MHz,88.0/44.0 MHz.