Biostar B75MU3B Owner's Manual

Boot Block Beep Codes 

1 

No media present. (Insert diskette in floppy drive A:) 

2 

“AMIBOOT.ROM” file not found in root directory of diskette in 
A: 

3 

Insert next diskette if multiple diskettes are used for recovery 

4 

Flash Programming successful 

5 

File read error 

7 

No Flash EPROM detected 

10 

Flash Erase error 

11 

Flash Program error 

12 

“AMIBOOT.ROM” file size error 

13 

BIOS ROM image mismatch (file layout does not match 

image present in flash device) 

1 

Memory refresh timer error 

3 

Base memory read/write test error 

6 

Keyboard controller BAT command failed 

7 

General exception error (processor exception interrupt error) 

8 

Display memory error (system video adapter) 

1, 3 

Reseat the memory, or replace with known good modules. 

6, 7 

Fatal error indicating a serious problem with the system. 

Consult your system manufacturer. Before declaring the 
motherboard beyond all hope, eliminate the possibility of 
interference by a malfunctioning add-in card. Remove all 

expansion cards except the video adapter. 
z

 If beep codes are generated when all other expansion 

cards are absent, consult your system manufacturer’s 
technical support. 

z

 If beep codes are not generated when all other expansion 

cards are absent, one of the add-in cards is causing the 
malfunction. Insert the cards back into the system one at a 

time until the problem happens again. This will reveal the 
malfunctioning card. 

8 

If the system video adapter is an add-in card, replace or 
reseat the 
video adapter. If the video adapter is an integrated part of the 

system board, the board may be faulty.