Billion Electric Company BIPAC 8501 User Manual

SHDSL VPN Firewall Bridge/Router

Chapter 3: Basic Installation

Factory Default Settings

Before configuring your, you need to know the following default settings.

Web Interface (Username and Password)

Username: admin
Password: admin

The default username and password are “admin” and “admin” respectively.

Attention

If you ever forget the username/password to login to the router, you may
press the RESET button up to 6 seconds to restore the factory default
settings.

Caution: After pressing the RESET button for more than 6 seconds, to be sure you power
cycle the device again.

Device LAN IP settings:

IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0

ISP setting in WAN site:

PPPoE

DHCP server

  DHCP server is enabled.
  Start IP Address: 192.168.1.100
  IP pool counts: 100

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

LAN Port

WAN Port

IP address

192.168.1.254

Subnet Mask

255.255.255.0

DHCP server function

Enabled

IP addresses for
distribution to PCs

100 IP addresses continuing from
192.168.1.100 through 192.168.1.199

The PPPoE function is enabled
to automatically get the WAN
port configuration from the ISP.