Billion Electric Company BiPAC 7402NX(L) User Manual

- 2 -

Hardware Overview

The Front LEDs

The Rear Ports

Connect the

supplied power

adapter to this jack

Connect the supplied
RJ-11 cable to this port
when connecting to the
ADSL/telephone
network

Connect your computer
to a LAN port, using the
included Ethernet cable

Connect the

detachable antenna

Lit when connected to
an Ethernet device.
Green for 1000Mbps;
Orange for 100Mbps.
Without shining for
10Mbps.
Blinking when data is
Transmitted / Received

Lit green when IP connected.
Flashes green when IP connected and
IP traffic is passing thru the device.
Lit red when device attempted to
become IP connected and failed

Lit when power is ON.

Lit red when POST
(Power On Self Test)
failure (not bootable) or

device malfunctions

Lit green when the wireless
connection is made.
Flashes when sending/receiving data.
Flashes regularly when WPS is active

Lit green when
successfully
connected to an
ADSL DSLAM
(“line sync”)

Press it to reset the
device or restore to
factory default
settings

Push WPS button to
trigger Wi-Fi Protected
Setup

BiPAC 7402NX(L) has 802.11n draft Wireless Access Point and Giga
Switch Support.

Power ON/
OFF switch

3G/ HSDPA USB
modem backup
for Internet
access

Lit green when the
USB device is ready.
Flashes when
sending/ receiving

data.

Connect Console
cable