Billion Electric Company BiPAC 6404VP User Manual
VoIP/(802.11g) Broadband Firewall Router
Chapter 4: Configuration
Wizard
This section provides easy setup for your VoIP service. Phone port 1 and 2 can be registered to different
SIP Service Provider.
SIP Service Provider.
Voice QoS
DSCP Marking: Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP
Marking allows users to assign specific application traffic to be executed in priority by the next Router
based on the DSCP value.
Marking allows users to assign specific application traffic to be executed in priority by the next Router
based on the DSCP value.
Note: To be sure the router(s) in the backbones network have the capability in executing and checking the DSCP
through-out the QoS network.
through-out the QoS network.
Setting for Phone Port 1
SIP Service Provider: This section allows you to select the service provider. When the selection is done,
respective parameters below are automatically displayed.
respective parameters below are automatically displayed.
Select Profile: It allows you to select a desired VoIP provider whom is not defined already in the SIP
Service Provider. You may manually setup the SIP accounts by entering VoIP SIP information to
User-defined Profile. See below for details.
Service Provider. You may manually setup the SIP accounts by entering VoIP SIP information to
User-defined Profile. See below for details.
Phone Number: This parameter holds the registration ID of the user within the VoIP SIP registrar.
Authentication Username: If the username is same as the Phone Number, leave it blank. Otherwise,
fill in the space with your username given by your VoIP provider.
fill in the space with your username given by your VoIP provider.
Authentication Password: This parameter holds the password used for authentication within VoIP SIP
registrar.
registrar.
61