Benq VW2430H Owner's Manual
9
How to assemble your monitor hardware
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on
the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like the
monitor packaging bag on the desk for padding.
area on your desk and placing a soft item like the
monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
surface.
Attach the monitor stand to the monitor base as
illustrated until it locks in place.
illustrated until it locks in place.
Tighten the thumbscrew on the bottom of the monitor
base as illustrated.
base as illustrated.
Orient and align the stand arm with the monitor, then
push them together until they click and lock into place.
push them together until they click and lock into place.
Gently attempt to pull them back apart to check that
they have properly engaged.
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
upright on its stand on a flat even surface.