Belkin F5D8236-4 PM01123 Leaflet
LAN
WAN
Setup CD
1
4
3
3
2
2
1
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows is either a registered trademark
or trademark of Microsoft Corporation in the United States and/or other countries. Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.
or trademark of Microsoft Corporation in the United States and/or other countries. Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.
F5D8236-4 • PM01123
1.
Unplug your existing modem’s power supply.
Find the cable connecting your modem and computer.
Unplug it from the modem and plug it into the gray port
on the Belkin Router.
If you are replacing an existing router, find the cable
connecting the computer and old router. Disconnect it from
the old router and plug it into the gray port on the new router.
Unplug it from the modem and plug it into the gray port
on the Belkin Router.
If you are replacing an existing router, find the cable
connecting the computer and old router. Disconnect it from
the old router and plug it into the gray port on the new router.
2.
Connect the new cable (provided in the box) to the yellow
port on the Router. Plug the other end into the modem.
N WIRELESS ROUTER
Quick Installation Guide
3.
Plug in your modem’s power supply. Wait 60 seconds for the
modem to start up.
Plug the Router’s power supply into a wall outlet, and the
other end into the black port on the Belkin Router.
As the Router wakes up, lights will come on; recheck your
connections if the “router” and the “wired” lights are not a
steady blue after 20 seconds.
other end into the black port on the Belkin Router.
As the Router wakes up, lights will come on; recheck your
connections if the “router” and the “wired” lights are not a
steady blue after 20 seconds.
4.
Locate the CD in this guide an d insert it into your computer.
The Setup Assistant should appear automatically.
If it doesn’t, open the CD in My Computer (Windows
If it doesn’t, open the CD in My Computer (Windows
®
)
or the Finder (Mac OS
®
X) and double-click on the
“Setup Assistant” icon.