Belkin PUREIAV AP30800fc10-BLK User Manual
B
elkin
Pur
eA
V
eA
V
B
at
tery
B
B
ack
up
up
7
Installation
To Silence Audible Alarm
There are two ways to disable the audible alarm:
There are two ways to disable the audible alarm:
1. Set the Alert Sound ON/OFF Switch to the OFF position. When in the
OFF position, the audible alarm will not sound when the Belkin PureAV
Battery Backup is in the backup mode.
Battery Backup is in the backup mode.
2. While the Battery Backup is in battery-backup mode, push the “ON/
OFF/TEST” button less than 1.5 seconds to silence the audible alarm.
(This does not work if the Belkin PureAV Battery Backup is under low-
battery or overload condition.)
(This does not work if the Belkin PureAV Battery Backup is under low-
battery or overload condition.)
All equipment must be turned off prior to hardware installation.
Connect Audio Video Coaxial Cable
Connect a modular coaxial cable between the cable wall outlet and the
surge protector jack marked “IN”. Connect another coaxial cable between
the surge protector jack marked “OUT” and the cable equipment or cable
modem being protected.
Connect a modular coaxial cable between the cable wall outlet and the
surge protector jack marked “IN”. Connect another coaxial cable between
the surge protector jack marked “OUT” and the cable equipment or cable
modem being protected.
*All equipment must be turned off prior to hardware installation.