Beko 22WLP530HID User Manual

15 

If the channel you found is not of 

the desired quality and requires Fine 

Tuning, then select the 

FINE TUNE  

tab by pressing the Down movement 

button in the 

Setup menu. Using 

the 

Left/Right movement buttons 

on your remote control, adjust the 

broadcast displayed on the screen to your 

desired quality. Under normal circumstances, 

you will not require to use the Fine Tune 

function. The AFC values of your television 

will automatically adjust and lock themselves 

to the channel. However, you might need 

it in case the television transmitters do not 

operate according to the standards. To store 

in the memory the settings you have made, 

select the 

Store tab and press the Right or 

Left movement button.

Press the 

MENU button. Move to the 

PROGRAM TABLE tab by pressing the 

Down movement button in Main Menu and 

confirm your selection with the 

OK button. 

Program Table menu will be displayed.

Select the system in which you 

would like to make the search 

from the 

SYSTEM tab. Move into 

CHANNEL tab by pressing the down 

movement button. Press 

OK on 

your remote control to select 

“S” for 

cable channels and 

“C” for channels 

received via the antenna. Move onto 

the 

PROGRAM NO tab and using the 

number buttons enter the channel number 

in which you would like to have the channel 

stored. If the broadcast viewed on the screen 

is of your desired quality, first move onto the 

STORE tab with the down movement button 

to store in the memory the selection you have 

made and store the channel by pressing 

the 

Left or Right movement buttons. The 

prompt 

STORED will be displayed briefly. 

The channel will be stored according to the 

program number of your choice. You can 

tune and store in memory other channels the 

same way. In the event that you wish to exit 

the channel settings menu for any reason, 

simply press the 

EXIT button.

Press the 

MENU button. Move to 

the 

SETUP menu by pressing the 

Down movement button in the Main 

Menu and confirm your selection 

with the 

OK button. Setup menu will 

be displayed. Select the system in 

which you would like to make the 

search from the 

SYSTEM tab. Move 

into 

CHANNEL tab by pressing the 

down movement button. Press 

OK on 

your remote control to select 

“S” for 

cable channels and 

“C” for channels 

received via the antenna. Select 

SEARCH tab 

using the 

Up/Down movement buttons, and 

scan the channels in ascending order with 

Right movement button and in descending 

order with 

Left movement button. If the 

channel that is found is of your liking, select 

the 

STORE tab. Then store it in the memory 

by pressing the 

Right or Left movement 

buttons. Repeat the same procedure for other 

channels by selecting the program number 

of your choice from the 

PROGRAM NO tab. 

If the channel you found is not of the desired 

quality and requires Fine Tuning or if you 

would like to rename the channel, refer to the 

relevant sections.