Behringer Phaser PH9 Owner's Manual

Thank you for showing your confidence in us by purchasing the BEHRINGER PHASER PH9. This ultimate 

effects pedal is designed for all musicians longing for a way to pep up their sound. Thanks to its 

high-performance features, you can create phase-shifting effects with different characteristics ranging 

from modern to vintage.
With the phaser, a second phase-shifted signal is added to the original audio of your instrument. 

The resulting sound is thicker and above all livelier. Nowadays, this effect is often used for guitar sounds 

and keyboards, but it was also extensively used for other instruments like electric pianos in the ‘70s.

(1) 

The RATE control determines the speed of the phase-shifting effect, in other words the 

overall effect rate.

(2) 

The SWIRL switch changes the phaser character from modern (upper position) to vintage 

(lower position).

(3) 

The LED illuminates when the effect is activated. It also serves as a battery level indicator. 

(4) 

Depress the footswitch to activate/deactivate the effect.

(5) 

Use this ¼" TS IN connector to plug in the instrument cable.

(6) 

The ¼" TS OUT connector sends the signal to your amp.

Use the DC IN connection to plug in a 9 V power supply (not included). 
To install or replace the 9 V battery, remove the bottom side of the unit taking the four screws off.

The SERIAL NUMBER is located on the bottom side of the device.

(2)

(6)

(1)

(5)

(3)

(4)

Classic 90° Phase Shifter