Behringer Dynamic Wah DW400 Owner's Manual

DYNAMIC WAH DW400

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE

MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS

WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.

COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS

ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR

IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM

OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS

Tortola, British Virgin Islands

(9)

The ON/BATT LED illuminates when the effect is activated. It also serves as a battery

level indicator. If the Tap function is active, the LED flashes.

(10)

Use the foot switch to activate/deactivate the effect. When pressing the foot switch 2 seconds

or longer, you can tap in the Auto Wah effect time (ON/BATT LED flashes).

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,

press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊ The DW400 has no On/Off switch. It is operable as soon as you insert a plug into the

IN connector. Disconnect the plug, if you don’t use the DW400. In doing so, you can

extend the life time of the battery.

The SERIAL NUMBER is located at the underside.
◊ In rare cases interferences of the normal function may appear by external influence

(e.g. electrostatic discharge), as for example sound disturbances or malfunctions.

If this occurs, please turn down the volume on subsequent amplifiers and disconnect

the input connector briefly to restart the application.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com

and read the terms and conditions of our warranty carefully.

4. Specifications

GTR IN / BASS IN

Connector

¼" TS

Impedance

500 kΩ

OUT

Connector

¼" TS

Impedance

1 kΩ

EXP/CTL

Connector

¼" TRS

Impedance

1 kΩ

Power Supply

9 V

��, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada

120 V~, 60 Hz

China

220 V~, 50 Hz

Korea

220 V~, 60 Hz

Europe/Australia 230 V~, 50 Hz
Japan

100 V~, 50/60 Hz

Power connector

2 mm DC jack,
negative center

Battery

9 V type 6LR61

Power consumption 30 mA

Physical/Weight

Dimensions

approx. 2 1/8 x 2 3/4 x 4 4/5"

(H x W x D)

approx. 54 x 70 x 123 mm

Weight

approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the highest
professional standards. As a result of these efforts, modifications
may be made from time to time to existing products without
prior notice. Specifications and appearance may therefore differ
from those listed or shown.