Brother LX-910D User Manual

- 7 -

Located on the left, backside of the machine.  Aperture for the AC
adapter.

For replacing the film cartridge and cutter units.

Located on the top cover.  Allows you to make sure that the
correct type of film cartridge is loaded into the machine.

Where documents to be laminated are placed.

Supports the document for insertion.

Aligns the left edge of the paper for proper document insertion.

Power switch and function button area.

Document output 

Location where the document exits the machine.

Allows you to trim the corners of your document after laminating.
Corners of a document are automatically trimmed after insertion
into the corner cutter slot.

The corner of your laminated document is placed on this tray to
position it into the corner cutter slot.

Collects trimmings from the corner cutter.

Plugs into an electrical outlet and the DC connector on the
machine.

Contains the roll film. The label on the cartridge identifies the film
type.
You can use 9.0 inch (A4) or 4.8 inch (A6) width LC cartridges
with this machine.

Releases the roller.

Locks the roller holder.

Holds the roller unit.

Arm for the side (vertical) cutter unit.

Blades for side (vertical) cutting.

Blades for top/bottom (horizontal) cutting.

Feeds the document into the unit.

Document guide

Document supporter

Document tray

Viewing window

Control Panel

Corner cutter slot

Corner cutter dust box

Document output

Top cover

DC connector

Film cartridge

Roller holder

Roller release
lever

Side cutter arm

Top/bottom cutter unit

Roller holder
lock button

Roller

Side cutter
unit