Behringer EUROPOWER EPQ1200 Brochure

Page 2 of 9

Minimum depth chassis 
(10.1" / 257 mm) and ultra-light 
weight design (14.8 lbs / 6.7 kg), 
fits into compact, inexpensive 
effects racks

2 x 390 Watts into 4 Ohms;  
2 x 245 Watts into 8 Ohms

Independent limiters for each 
channel offer maximum output level 
with reliable overload protection

Servo-balanced XLR and 1/4" TRS 
inputs plus professional 
speaker connectors

Minimum depth chassis (10.1" /  
257 mm) and ultra-light weight 
design (10.8 lbs / 4.9 kg) fits into 
compact, inexpensive effects racks

2 x 230 Watts into 4 Ohms;  
2 x 130 Watts into 8 Ohms 

Independent limiters for each 
channel offer maximum output level 
with reliable overload protection

Servo-balanced XLR and 1/4" TRS 
inputs plus professional 
speaker connectors

Minimum depth chassis (10.1" /  
257 mm) and ultra-light weight 
design (10.3 lbs / 4.7 kg) fits into 
compact, inexpensive effects racks

4 x 75 Watts into 4 Ohms;  
4 x 50 Watts into 8 Ohms 

Independent limiters for each 
channel offer maximum output level 
with reliable overload protection

The simple front panel controls and 

indicators of these amps provide all 
of your system’s vital signs at a glance. 
After pressing the Power Button, 
the POWER LED will light to show the 
amp is ready for action. All channels have 
independent gain dials with SIGNAL 
LEDs that light when a signal is present, 
as well as clip LEDs to indicate when the 
signal is distorted and you need to reduce 
the gain.

While all EPQ models accept balanced 

XLR and 1/4" TRS INPUTs, the EPQ2000 
and EPQ1200 also accept unbalanced 
RCA connections. Professional locking 
speaker outputs are provided to securely 
connect to your passive loudspeakers, 
plus touch-proof binding posts are 
supplied on the EQP1200 and EPQ2000 
models. The same panel contains switches 
that allow you to put these amps to work 
in either mono, stereo or mono bridge 
mode. The four-channel EPQ304 can be 
operated in quad mono, dual stereo or 
dual bridge mode. 

A built-in CROSSOVER switch 

(EPQ2000 and EPQ12000 only) allows you 
operate in biamp mode, sending low 
frequency content to subwoofers via 
the CH1 output and mid/high frequency 
output to CH2. The crossover frequency is 
preset internally at 100 Hz. Additionally, 
the EPQ2000 and EPQ12000 models each 
feature a built-in, switchable LIMITER for 
the ultimate in loudspeaker protection.

BEHRINGER’s new EPQ power amps are 

exceptionally light, pack massive power 
and are built to withstand the rigors 
of the road. With four unique models 
to choose from, there’s an EPQ Series 
amp that is ideal for your application, 
no matter how diverse–plus its light price 
tag will leave you with money left over to 
acquire more stuff to amplify! Check out 
the EPQ Series today and find out why 
BEHRINGER power amps are among the 
most popular on Earth.

1

2

1

2

1

2

Stereo

Bridge

Mono