Bay Technical Associates 525H User Manual

28

You may now reconfigure Port 3 by selecting the appropriate option
(1-6) from the menu. For example, to change the baud rate to 2400
baud, send character "

2" (Set baud rate).  The multiport will respond

with:

1  For    110
2  For    135
3  For    300
4  For    600
5  For   1200
6  For   2400
7  For   4800
8  For   9600

Enter request:

Enter "

6" for 2400 baud rate, and the multiport will respond with the

reconfigured status of the port and the menu of options:

•••••••••••••••••••••••••••••••••••••••••
• Port • Baud • Word • Stop •Parity•Xon/•
•      • Rate • Size • Bits •      •Xoff•
•••••••••••••••••••••••••••••••••••••••••
•  3   • 2400 • 8    • 1    • None • Off•
•••••••••••••••••••••••••••••••••••••••••
Exit/Save.........1  Set stop bits......4
Set baud rate.....2  Set parity.........5
Set word size.....3  Set Xon/Xoff.......6

Enter request:

If there are no other changes for this port, enter "

1" (Exit/Save), and

the multiport will respond with:

Save Changes Permanently? (Y/N):

If you answer "

Y" (yes), the new configuration for that port will be

stored permanently in non-volatile memory and the multiport will
subsequently power-up at the new configuration.  If you answer "

N"

(no), the new configuration will be stored in RAM and on the next
power-up, the multiport will revert to the previous configuration.