Bay Technical Associates 525H User Manual

By responding to the Enter Request: message at the end of the main
configuration menu (see

Section 6.1) with "5" (Set Control Character),

you may change the control character.

WARNING: BayTech advises you to log your new control character. If
it is forgotten, you will not be able to control the unit or access the
configuration mode.

CONTROL
CHARACTER____________ DATE______ BY___

The multiport will respond with:

Current Control Character is...............14H
Enter Control Character in Hex.............:

You may now enter the new control character that you want in HEX
(00 to 7F Hex). For example, if you enter "

15 " (Control-U), the

multiport will respond with:

Current Control Character is...............15H
Save Changes Permanently? (Y/N):

If you answer "

Y" (yes), the new control character will be saved in

non-volatile memory, and the multiport will respond only to that
character. The multiport will respond with:

Are You Sure? (Y/N):

This message gives you a second chance to consider this change and
reminds you to log your new control character. If you answer either
question with "

N" (no), the new control character will be stored in RAM

and lost upon next power-up. The multiport will return to the main
configuration menu (see

Section 6.1).