Bay Technical Associates 350 User Manual

Using the BayStack 350 10/100 Autosense Switch

3-48

893-00992-B

The Software Download screen (Figure 3-22) allows you to revise the BayStack 
350 switch software image that is located in nonvolatile flash memory. To 
download the BayStack 350 switch software image, a properly configured Trivial 
File Transfer Protocol (TFTP) server must be present in your network, and the 
switch must be configured with an IP address. (See “IP Configuration” on 

 to learn how to configure the switch IP address.)

You can monitor the software download process by observing the BayStack 350 
switch LEDs (see “LED Indications During the Download Process” on 

Do not interrupt power to the device during the software download 

process. If the power is interrupted, the firmware image can become corrupted.

                                Software Download

       Image Filename:                [ b350_100.img ]

       TFTP Server IP Address:        [ 192.0.1.12 ]

       Start TFTP Load of New Image:  [ Yes ]

       The Software Download process has started.  Do NOT power down the

       switch before the process has completed (approximately 10 minutes).

Enter text, press <Return> or <Enter> to select choice.

Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

350fbk.book  Page 48  Wednesday, July 9, 1997  4:51 PM