Bay Technical Associates 350 User Manual
Installation
893-00992-B
2-5
Installing the BayStack 350 Switch
This section explains how to install, power up, and verify the operation of the
BayStack 350 switch. Before you begin these procedures, read and follow the
instructions in “Site Preparation” on
BayStack 350 switch. Before you begin these procedures, read and follow the
instructions in “Site Preparation” on
.
You can install the BayStack 350 switch in any of the following locations:
•
Surface mounting
— Tabletop or shelf (secured or unsecured)
— Wall mount
•
Rack mounting
— 19-inch equipment rack
Surface Mounting
The BayStack 350 switch can be mounted on any surface that can safely support
the weight of the switch and attached cables, as long as there is adequate space
around the unit for ventilation and access to cable connectors. You can use the
mounting brackets supplied with the switch to secure it to the installation location.
the weight of the switch and attached cables, as long as there is adequate space
around the unit for ventilation and access to cable connectors. You can use the
mounting brackets supplied with the switch to secure it to the installation location.
Warning:
To avoid bodily injury from hazardous electrical current, do not
connect the power cord until instructed to do so.
Note:
In most cases, it is not necessary to secure the BayStack 350 switch to a
tabletop or shelf. However, if conditions warrant securing the switch (for
example, in locations where the switch might accidentally fall from a shelf or
overhead location), you can secure the switch using two mounting brackets
(supplied).
example, in locations where the switch might accidentally fall from a shelf or
overhead location), you can secure the switch using two mounting brackets
(supplied).
350fbk.book Page 5 Wednesday, July 9, 1997 4:51 PM