Bay Technical Associates 350 User Manual
Using the BayStack 350 10/100 Autosense Switch
2-10
893-00992-B
Rack Mounting
The BayStack 350 switch occupies one single-unit rack space and can be installed
in most standard 19-inch racks.
in most standard 19-inch racks.
To install the BayStack 350 switch in a 19-inch rack, follow these steps:
1.
If rubber footpads are attached to the bottom of the unit, remove them.
2.
3.
Using a Phillips (or cross-head) screwdriver, attach a mounting bracket
to each side of the switch using the screws supplied with the unit.
to each side of the switch using the screws supplied with the unit.
Figure 2-5.
Attaching the mounting brackets for a rack mount
Caution:
When mounting this device in a rack, do not stack units directly on
top of one another in the rack. Each unit must be secured to the rack with
appropriate mounting brackets. Mounting brackets are not designed to support
multiple units.
appropriate mounting brackets. Mounting brackets are not designed to support
multiple units.
Note:
When mounting this device in a rack, do not attach the four rubber
footpads supplied with the unit.
610FA
350T
10/100 Autosense Switch
witch
350fbk.book Page 10 Wednesday, July 9, 1997 4:51 PM