LG BB4330A Owner's Manual

15

C

onnecting

Yellow

The wireless subwoofer is 
receiving the signal of the 
unit.

Yellow (blink)

The wireless subwoofer is 
trying to connect.

Red

The Wireless subwoofer is in 
standby mode.

Off (No display)

The Wireless subwoofer is 
turned off.

1.  Connect the power cord of the Wireless 

subwoofer to the outlet.

2.  Turn on the main unit : The main unit and 

wireless subwoofer will be automatically 
connected. 

When the unit is manufactured, the ID is already 
set. If interference occurs or you  use a new wireless 
subwoofer, an ID should be set again.
1.  Press HOME ( ).
2. Use 

I/i to select the [Setup] and  

press ENTER (b). The [Setup] menu appears.

3. Use 

U/u to select [AUDIO] option then press i 

to move to the second level.

4. Use 

U/u to select the [Connect wireless 

speakers] option then press ENTER (b) or i to 

move to the third level.  
The [Wireless Speaker Connection Guide] 
appears.

5.  Press PAIRING button on the subwoofer.  

-  If you see the yellow LED indicator light, 

pairing was successful. 

6. Use 

I/i to select the [Speaker test] and press 

ENTER (b) for wireless speaker connection test. 

 

y If there is a strong electromagnetic wave 

product nearby, interference may occur. Put 
the unit (Wireless subwoofer and main unit) 
away from there.

 

y If you operate main unit then wireless 

subwoofer (rear speakers) sound within a 
few seconds in standby mode.

 

y Set the distance between this unit and 

subwoofer Receiver within 10 m (32 ft.).

 

y Optimum performance can be 

implemented only when the unit and 
the Wireless subwoofer within distance 
of 2 m (6 ft.) to 10 m (32 ft.) is used since 
communication failure may occur if longer 
distance is used.

 

y It takes a few seconds (and may take longer) 

for the Wireless Transmitter and subwoofer 
to communicate with each other.

 

,