Baumatic BC391.3TCSS User Manual
Minimum flow adjustment for hob gas taps.
32
All work must be carried out by a GASSAFE
o
Light the burner and set the
nob from the
tap and place a small bladed
screwdriver in the centre of
the tap shaft.
screwdriver in the centre of
the tap shaft.
ing screw to decrease the gas flow.
m.
as, the adjusting screw must be tightly
screwed in.
out by quickly turning from
maximum flow to minimum flow. If it does then remove the control
in
once the adjustment has been made.
IMPORTANT: On completion carry out a gas tightness test.
registered engineer.
knob at the minimum
position.
position.
o
Remove the k
o
Unscrew the adjusting screw, in order to increase the gas flow or
tighten the adjust
tighten the adjust
o
The correct adjustment is obtained when the flame has a length of
about 3 – 4 m
about 3 – 4 m
o
For butane/propane g
o
Refit the control knob.
o
Make sure that the flame does not go
knob and make further adjustments to the gas flow, testing it aga
o