LG 255LG Owner's Manual

Page of 40
System Setting
21
S
ys
tem Se
tting
3
Sampling Freq.  
(Digital Audio Output)
[192 kHz]
Select this if your A/V Receiver or Amplifier is 
capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz signals. When 
this choice is made, this unit automatically 
converts any 192 kHz signals to 96 kHz so your 
system can decode them. 
[48 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz and 96 kHz 
signal. When this choice is made, this unit 
automatically converts any 192 kHz and 96 kHz 
signals to 48 kHz so your system can decode 
them. 
Check the documentation for your A/V Receiver or 
Amplifier to verify its capabilities.
DRC (Dynamic Range Control) 
This function allows you to listen to a movie at a 
lower volume without losing clarity of sound.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby 
Digital, Dolby Digital Plus or Dolby TrueHD 
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio 
output is specified by itself.  
And the dynamic range of the Dolby Digital 
and Dolby Digital Plus are operated as same as 
the [On] mode.
The DRC setting can be changed only when a 
disc is not inserted or the unit is in complete 
stop mode.
 
,
Note
[LOCK] Menu
The [LOCK] settings affect only Blu-ray Disc and 
DVD playback.
To access the any features in [LOCK] settings, you 
must enter the 4-digit security code you have 
created.  
If you have not entered a password yet, you are 
prompted to do so. Enter a 4-digit password twice, 
and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press 
ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER (b).
Enter a 4-digit password twice, and press 
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using 
the following steps:
1.  Remove any disc that might be in the player.
2.  Select [Password] option in the [Setup] menu.
3.  Use number buttons to enter “210499”. The 
password is cleared.
If you make a mistake before pressing  
ENTER (b), press CLEAR. Then input the 
correct password.
 
,
Note
DVD Rating 
Blocks playback of rated DVD based on their 
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and 
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not 
active and the disc plays in full.