Baumatic BC190.2TCSS User Manual
12
Using your gas range cooker
Before first use
o
To remove any residue from the oven cavity that may have been
left from the manufacturing process, you should light the gas
oven and set it to its maximum temperature.
left from the manufacturing process, you should light the gas
oven and set it to its maximum temperature.
o
It is perfectly normal for a smell to be produced during this
process.
process.
o
You should make sure that any windows in the room are left
open during this process.
open during this process.
o
It is advisable for you not to remain in the room whilst the
burning off process is taking place.
burning off process is taking place.
o
You should leave the oven on maximum setting for 30 – 40
minutes.
minutes.
Switching the gas oven on
The oven has automatic ignition, to light it you should do the
following:-
o
Open the oven door.
o
Push the main oven control
knob down fully and then turn
it clockwise to the gas mark 8
position (the 8 has a * symbol
above it).
knob down fully and then turn
it clockwise to the gas mark 8
position (the 8 has a * symbol
above it).
o
If you keep the control knob
depressed, the automatic
ignition for the burner will
operate.
depressed, the automatic
ignition for the burner will
operate.
o
The gas oven should light
within 15 seconds.
within 15 seconds.
o
Once the burner has lit,
continue to keep the control knob held down for a further 10
seconds. Otherwise the safety cut off will operate and block the
flow of gas.
seconds. Otherwise the safety cut off will operate and block the
flow of gas.
o
IMPORTANT: When you are certain that the oven burner is fully
lit, close the oven door. Turn the control knob clockwise until it
reaches the gas mark that you desire.
lit, close the oven door. Turn the control knob clockwise until it
reaches the gas mark that you desire.