Barco DICOM THEATER LITE MGP D5 User Manual

Barco DPMS Screen Saver

MGP D5 Dicom Theater Lite

67

DPMS Settings After Work Day

If you have an display controller that supports DPMS calls, then 
you will be able to set the DPMS Settings for after the work day. 
Otherwise, a text box will be displayed telling you why DPMS 
functions are not available.

Amount of Time in each DPMS State

After the work day, the display will be placed into one of the 
following DPMS Power States: Stand-By, Suspend, or Off. The 
default setting is for the display to directly go into the Off State 
and spend no time in the Stand-By or Suspend states. If the user 
wishes to go into the Stand-By or Suspend states before going 
into the Off state, select the required amount of time for each 
state.

If requested, the display will first go into Stand-By state, then 
into Suspend state, and then into Off state. The properties of 
DPMS states are listed in the following table:

Monitor Settings

If you have a Barco Medical Display, select “Barco Quick Start.” If 
a non-Barco display is being used, select the amount of time it 
takes your display to warm up via the “Monitor Setting” section. 
Contact your display vendor for this warm-up time.

On

None

N/A

Stand-by

Minimal

Short

Suspend

Substantial

Longer

Off

Maximum

Longest