Barco Clinical review MDRC-2124 User Manual

 

 

 

  

19 

Use only the power adapter, power cord, and the video cables shipped 
with this display. 

To setup this display, please refer to the following figure and 
procedures. 

1.  Be sure all equipment is turned off. 

2.  Connect the DC power cord to the power connector; plug one 

end of the AC power cord into the power adapter, and the 
other end into an electrical outlet. (      ). 

3.  For a PC with DisplayPort output, connect the DisplayPort 

signal cable from the display DisplayPort input connector to 
the DisplayPort connector of your host computer. (      ). 

4.  For a PC with DVI digital output, connect the DVI signal cable 

from the display DVI-I input connector to the DVI connector of 
your host computer. Tighten the screws (      ). 

5.  Turn on your computer, display and video source.