Denon AVR-3808CI User Manual

s

Make speaker settings for 2-channel mode playback.

To change the settings, select “Custom”.

z

 

Select front speaker size.

 

Select subwoofer use.

 

Select low range signal to be reproduced by subwoofer.

 

Select crossover frequency from which subwoofer handles low range 
signal.

 

 

 

 

 

 

 

 

 

Set distance from listening position to front left speaker.

Set distance from listening position to front right speaker.

d

Set dynamic range for downmix playback of Dolby Digital 
sources.

 

• Set  this  to  “ON”  if  the  sound  from  the  front  speakers  seems 

distorted.

• When  not  using  the  center  speaker  or  surround  speakers,  the 

playback sound is down-mixed and output from the front speakers.

f

Make  setting  for  memorizing  surround  mode  setting  for 
each input signal type.

 

• The auto surround mode function lets you store in the memory the 

surround mode last used for playing the four types of input signals 
listed below.
q

Analog and PCM 2-channel signals

w

Dolby Digital and DTS 2-channel signals

e

Dolby Digital and DTS multi-channel signals

r

Multi-channel  signals  other  than  Dolby  Digital  and  DTS  (PCM, 
DSD, etc.)

• When playing in the PURE DIRECT mode, the surround mode does 

not change even if the input signal is changed.



g

Adjust  tonal  quality  for  each  speaker  using  graphic 
equalizer.

Select speaker adjustment method.

 

 

Select the speaker and frequency band and adjust the level.

 

 

 

 

 

 

 

 

Copy “Audyssey Flat” curve from Room EQ.

 

“Curve Copy” is displayed after the auto setup procedure has been 
performed.

Resets the settings to the default values.

–20dB ~ +6dB

Make network settings.

F 

Menu tree F

z

:  Use the same settings as in “Speaker Setup”.