Denon AVR-3808CI User Manual



 : Optimize frequency response of all speakers.

 : Optimize  frequency  response  of  speakers 

except front L and R speakers.

 : Optimize frequency response of all speakers to 

flat response.

 : Apply  frequency  response  set  with  “Manual 

EQ”.

 : Turn equalizer off.

d

Select room equalizer for current environment.

Press the ROOM EQ button on the main unit or the EQ button on the 
main remote control.

Audyssey

Audyssey Byp. L/R

Audyssey Flat

Manual

OFF

When “Audyssey” is selected, “

” lights.

When “Audyssey Byp. L/R” or “Audyssey Flat” is selected, or when 
the auto setup measuring results have changed, “

” lights.

• “Audyssey”,  “Audyssey  Byp.  L/R”  and  “Audyssey  Flat”  can  be 

selected after the auto setup procedure has been performed.

• If the settings of the speakers for which “None” has been determined 

at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R” and 
“Audyssey Flat” cannot be selected and measurements have to be 
taken again to include the newly-added speakers.

• When using headphones, “Room EQ” is always set to “OFF”.

• Such compressed audio formats as MP3, WMA (Windows Media 

Audio) and MPEG-4 AAC reduce the amount of data by eliminating 
signal  components  that  are  hard  for  the  human  ear  to  hear. The 
RESTORER  function  generates  the  signals  eliminated  upon 
compression, restoring the sound to conditions near those of the 
original  sound  before  compression.  It  also  corrects  the  sense  of 
volume of the bass to obtain richer sound with compressed audio 
signals.

• This is displayed on the GUI menu and can be set when the input 

source  is  set  to  “XM”  or  “NET/USB”,  or  when  analog  signals 
(including AM/FM signals) or PCM signals (fs = 44.1/48 kHz) are 
input.

f

This  function  restores  compressed  audio  signals  to  how 
they were before compression and corrects the sense of 
volume of the bass to obtain richer playback sound.

During playback, press the RESTORER button on the main unit or the 
RSTR button on the main remote control unit.
When set to something other than “OFF”, “

” is displayed.

OFF

Mode 1

(RESTORER 64)

Mode 2

(RESTORER 96)

Mode 3

(RESTORER HQ)

 

 

Attenuate subwoofer level when using EXT. IN mode.

Set this to “ON” if the subwoofer channel level seems too high when 
playing Super Audio CD.

Turn subwoofer output on and off.

Resets the settings to the default values.

Turn tone adjustments off.

The tone cannot be adjusted when in the DIRECT mode.

Adjust low frequency range (bass).

Adjust high frequency range (treble).

“Bass” and “Treble” can be set when “Tone Defeat” is set to “OFF”.

 

 

 

s

Adjust the tonal quality of the sound.

The default setting for “NET/USB” and “iPod” is “Mode3”. All others 
are set to “OFF”.

 

 (RESTORER 64)

 (RESTORER 96)

 (RESTORER HQ)