Bully Dog Surge Protector 40366 v1.0.0 User Manual
4
HARNESS DESCRIPTIONS
Notice: included with this product are four individual wiring harnesses. Read the description
of each the harness below , the installation instructions will refer to the diff erent harnesses
by name.
of each the harness below , the installation instructions will refer to the diff erent harnesses
by name.
OUTLOOK MAIN HARNESS: The OutLook Monitor sits on one end of this harness and on the other end
notice it has two green plugs (one male and one female). These green plugs will connect this harness to
two other harnesses. Further the end of this harness has two sets of pyro wires which are labeled Pyro 1
and Pyro 2
OBD 2 HARNESS: On one end of this harness is a green plug (male) identical to the plug on the end of the
OutLook Main Harness. From that green plug two wires branch off , one is a yellow wire which is the Power Wire
and the other is the OBD 2 wire with the OBD 2 Plug on the end (a rectangular plug in appearance).
OUTLOOK SUB-HARNESS:
notice it has two green plugs (one male and one female). These green plugs will connect this harness to
two other harnesses. Further the end of this harness has two sets of pyro wires which are labeled Pyro 1
and Pyro 2
OBD 2 HARNESS: On one end of this harness is a green plug (male) identical to the plug on the end of the
OutLook Main Harness. From that green plug two wires branch off , one is a yellow wire which is the Power Wire
and the other is the OBD 2 wire with the OBD 2 Plug on the end (a rectangular plug in appearance).
OUTLOOK SUB-HARNESS:
This harness is not used on 2006 vehicles.
On one end is a green
plug (female) identical to the plug on the end of the OutLook Main Harness. On the opposite end of this
harness are two large connectors that make up the information plug.
PYROMETER PROBE: The pyrometer probe is a steel braded cable with a probe on one end and a red and
yellow electronic connection on the opposite end.
harness are two large connectors that make up the information plug.
PYROMETER PROBE: The pyrometer probe is a steel braded cable with a probe on one end and a red and
yellow electronic connection on the opposite end.
Sub-Harness
OutLook Main
OBD 2 Harness
Pyrometer Probe