Manualsbrain.com
  1. Manuals
  2. Brands
  3. Buffalo Technology
  4. TeraStation TS-RXL
  5. User Manual

Buffalo Technology TeraStation TS-RXL User Manual

Download
Page of 157
TeraStation User Manual
119
Network
Network
IP Address Settings
Click [Modify 
Settings] to change 
settings.
*  The LAN cable 
connected to LAN 
Port 2 should be 
set for Ethernet 2.
DHCP
If enabled, DHCP will configure your IP settings automatically.  A DHCP server on the 
network is required for use. 
Primary IP Address
If DHCP is disabled, you can enter an IP address manually.  
Subnet Mask
Set a subnet mask.
Default Gateway 
Address
Specify the IP address for a default gateway..
Primary DNS 
Server
Specify an IP address of the primary DNS server.
Secondary DNS 
Server
Specify an IP address of the secondary DNS server.
Wake on LAN
Select [Enable] or [Disable] for [Wake on LAN].
* TS-XEL series TeraStations do not support Wake on LAN.
Ethernet Frame Size
Click [Modify 
Settings] to change 
settings.
*  The LAN cable 
connected to LAN 
Port 2 should be 
set for Ethernet 2.
Ethernet Frame 
Size
You can improve transmission efficiency by changing the maximum size of data that 
can be sent at a time.
• [1518 bytes (Default)]: 
It is set to  1518 bytes at default.
• [4102 bytes (Jumbo Frame)]: Transfer at 4102 bytes.
• [7422 bytes (Jumbo Frame)]: Transfer at 7422 bytes.
• [9694 bytes (Jumbo Frame)]:  Transfer at 9694 bytes.
Network Services
Network Services
[HTTP]: It is set to [Enable] by default.
* You cannot open the Web Admin interface from a network for which [Disable] is selected. 
[HTTPS]: It is set to [Enable] by default.
* You cannot open the Web Admin interface through SSL from a network for which [Disable] is 
selected.
[SMB]: It is set to [Enable] by default.
* You cannot access the TeraStation via SMB from a network where [Disable] is selected. 
[AFP]: It is set to [Enable] by default.
* You cannot connect TeraStation via AFP from a Mac even if you add [AFP] in the shared folder 
settings. 
[FTP]: It is set to [Disable] by default.
* You cannot connect to the TeraStation via FTP from a Mac, even if you add [FTP] to the shared 
folder settings.To use FTP, change this setting to [Enable]. 
[Backup/Replication]: It is set to [Enable] by default.
* You cannot use the TeraStation as a backup destination from a network connected for which 
[Disable] is selected. 
[NasNavi Detection]: It is set to [Enable] by default. 
* If disabled, NAS Navigator2 will not be able to detect the TeraStation. 
* NAS Navigator2 detection should be enabled to update firmware, use auto power 
management, or use NS-SHIFT. 
[NFS]: It is set to [Enable] by default. 
* You cannot access the TeraStation from NFS clients if [Disable] is selected. 
[SFTP]: It is set to [Enable] by default. 
* You cannot access the TeraStation via SFTP if [Disable] is selected. 
[WebAccess]: It is set to [Enable] by default. 
* You cannot access the TeraStation via WebAccess feature if [Disable] is selected. 
[TeraSearch]: It is set to [Enable] by default.
 * You cannot use the TeraSearch if [Disable] is selected. 
[Power Interlock]: It is set to [Enable] by default. 
* You cannot use the auto power management if [Disable] is selected. 
* If Ethernet 1 and 2 are both disabled, and the Power Mode Switch is set to AUTO, the 
TeraStation will not turn on.   Move the Power Mode Switch to MANUAL to allow the 
TeraStation to power on again.
Add/Edit SSL Key
Set when updating SSL Server certification and the private key.