Buffalo Technology TeraStation TS-RXL User Manual

TeraStation User Manual

12

The TeraStation can be configured to automatically turn on and off with your computer.  To use this feature, install NAS 

Navigator2 on your computer(s) and then set the Power Mode Switch on the back of your TeraStation to AUTO.

Notes: 

• After you turn off your computer, it may take several minutes for the TeraStation to shut down.
•  When the Power Mode Switch is changed from Auto to Manual or vice-versa, it takes about five minutes for 

the change to take effect.

• Power on the TeraStation before moving the switch to the Auto position.
• Auto Power Mode doesn’t work if port trunking is enabled or if NasNavi detection is disabled.
•  Install NAS Navigator2 on all computers that will be accessing the TeraStation before switching to Auto Power 

Mode.  

•  Some networks may not support the Auto Power Mode.  If you have problems with it, just use Manual Power 

Mode.  

In this position, the power button on the front of the TeraStation turns it on 

and off.  It is not affected by the power state of connected computers.

In this position, if all connected computers are turned off, the TeraStation 

will turn off too.  If a connected computer is powered on, the TeraStation will 

power on too.  

TS-XL

TS-XEL

TS-WXL

TS-RXL