Brother Server Version 0 ENG User Manual
41
Control panel setup
4
Printing the Printer Settings Page (For HL-5450DN(T))
4
Note
Node name: The Node name appears on the Network Configuration Report. The default node name is
“BRNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
“BRNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
The Printer Settings Page prints a report listing all the current printer settings including the network print
server settings.
You can print the Printer Settings Page using Go of the machine.
server settings.
You can print the Printer Settings Page using Go of the machine.
a
Make sure that the front cover is closed and the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c
Press Go three times within 2 seconds. The machine will print the current Printer Settings Page.
Printing the Network Configuration Report
(For HL-5470DW(T) and HL-6180DW(T))
(For HL-5470DW(T) and HL-6180DW(T))
4
Note
Node name: The Node name appears on the Network Configuration Report. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration Report prints a report listing all the current network configuration including the
network print server settings.
network print server settings.
a
Press a or b to choose Machine Info..
Press OK.
Press OK.
b
Press a or b to choose Print NetSetting.
Press OK.
Press OK.
Note
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.