Britax FRONTIER 85 User Manual

Rotate the recline block to the

front and place the child seat

on the vehicle seat.

Ensure harness height is

adjusted to fit your child.

Pull the vehicle belt out and

route the belt through the first

belt slot, under the cover and

through the second belt slot.
Verify that the belt is not

twisted, then buckle.
Push the child seat firmly

into the vehicle seat while

removing all slack from the

vehicle belt.

Ensure that the vehicle belt

is locked as directed by your

vehicle owner’s manual.

The child seat is secure when it

cannot be moved front-to-back

or side-to-side more than 1 in.

(2.5 cm) at the belt path. If the

child seat is not secure, repeat

the installation procedure or

use a different seating location.

Firmly press the Versa-Tether

hook to the vehicle tether

anchor to attach. Remove all

slack from the tether webbing.
Use the elastic strap to contain

extra webbing.

Checklist

Check that positioning block is rotated to the front.

Check all connections and verify that child seat is secure.

The child seat is secure when it cannot be moved front-to-

back or side-to-side more than 1 in. (2.5 cm) at the belt path.

If the child seat is not secure, repeat the installation procedure

or use a different seating location.

Ensure any excess Versa-Tether

webbing is stored in elastic

band. Always ensure any excess webbing is contained within

your vehicle.

Check Versa-Tether

(Top Tether) attachment

Check vehicle

buckle attachment

<1 in.

Check that Versa-Tether

(Top Tether) webbing is

stored in elastic band

Check that the

Positioning Block is

rotated to the front

Check that there is

LESS than 1 in. (2.5 cm)

of movement (front to back

or side to side) at the belt path

Installing the Child Seat: Harness Mode