Breadman CF2002 User Manual
2.1 Installation Precautions
2
CF2002/CF3102
2-1
P
rec
auti
o
n
s
Chap
ter
2
2 Precautions
2.1
Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the printer in a
location that meets the following requirements.
location that meets the following requirements.
-
A location away from curtains, etc. that may catch fire and burn easily
-
A location that is not exposed to water or other liquids
-
A location free from direct sunlight
-
A location out of the direct airflow of an air conditioner or heater, and not
exposed to extremely high or low temperatures
exposed to extremely high or low temperatures
-
A well-ventilated location
-
A location that is not exposed to high humidity
-
A location that is not extremely dusty
-
A location not subjected to undue vibrations
-
A stable and level location
-
A location where ammonia or other organic gases are not generated
-
A location that does not put the operator in the direct airflow of exhaust from the
printer
printer
-
A location that is not near any kind of heating devices
Power Source
The power source requirements are as follows.
Voltage fluctuation: Maximum ±10%
(AC 127 V areas only: Between –10% and +6%)
(AC 127 V areas only: Between –10% and +6%)
Frequency fluctuation: Maximum ±0.3%
❍
Use a power source with as little voltage or frequency fluctuations as possible.