Breadman CF2002 User Manual
3
3.4 Selecting the Required Function
3-12
CF2002/CF3102
Be
for
e
M
a
k
ing
Pr
in
ts
Ch
apte
r 3
Engine Setup Items
Resume Printing
Shut Down
Restart Server
Shut Down System
Reboot System
Shut Down System
Reboot System
Run Setup
This command is used to enter the Setup mode of the printer controller.
(For more details, refer to the manual included with the printer
controller.)
(For more details, refer to the manual included with the printer
controller.)
Run Diagnostics
This command is used to run the diagnostic function. (For details, refer
to the manual included with the printer controller.)
to the manual included with the printer controller.)
Calibration
This command is used to perform the calibration. (For more details, refer
to the manual included with the printer controller.)
to the manual included with the printer controller.)
Engine Setup
Tray1 Setup
Special Paper
Output Tray
Crisscross
Low-Power Mode
Sleep Mode
Life Counter Clear
Screen Patern
Special Paper
Output Tray
Crisscross
Low-Power Mode
Sleep Mode
Life Counter Clear
Screen Patern
[Functions] menu
Submenu
Items
Setting
Tray 1 Setup
This function is used to specify the size of paper loaded in Tray 1.
Special Paper
This function is used to specify that the paper loaded in Tray 2, Tray 3 or Tray 4
is special paper. If the Special Paper is specified for any drawer, the paper is not
automatically selected with paper setting “Auto Paper” or with 2-sided printing.
is special paper. If the Special Paper is specified for any drawer, the paper is not
automatically selected with paper setting “Auto Paper” or with 2-sided printing.
Output Tray
This function is used to select the first priority of Output Trays.
This function can be set only if the Finisher (FN-116) is installed.
This function can be set only if the Finisher (FN-116) is installed.
Crisscross
This function is used to set whether or not prints will be sorted in crisscross
pattern if the necessary conditions are met while using the “Sort” mode.
pattern if the necessary conditions are met while using the “Sort” mode.
Low-Power Mode
This function is used to activate or deactivate the Energy Saver Mode.
If this mode is set to “On”, select the length of time after the last operation until
the printer automaticaly enters the Energy Saver Mode.
If this mode is set to “On”, select the length of time after the last operation until
the printer automaticaly enters the Energy Saver Mode.
Sleep Mode
This function is used to activate or deactivate the Sleep Mode.
If this mode is set to “On”, select the length of time after the last operation until
the printer autotmaticaly enters the Sleep Mode.
If this mode is set to “On”, select the length of time after the last operation until
the printer autotmaticaly enters the Sleep Mode.
Life Counter Clear
This function is used to reset the Life Counter value of the parts to “0”.
Screen Pattern
This function is used to select the type of Screen Pattern.