Bose Car Amplifier SA-4 User Manual
30 - English
Appendix B: Wall mounting the
SoundTouch™ SA-4 amplifier
Vertical
orientation
Connector
panel is
facing left.
Horizontal
orientation
Connector panel
is facing up.
Follow these instructions to wall mount your SoundTouch
TM
SA-4 amplifier.
Install either vertically with the connector panel facing left, or horizontally
with the connector panel facing up.
1. Remove rubber feet from the SA-4 amplifier. Use these holes to mount the
1. Remove rubber feet from the SA-4 amplifier. Use these holes to mount the
amplifier on the wall.
2. To mark mounting hole locations, hold the SA-4 amplifier in position and mark
the wall through the holes in the housing.
3. Drill holes.
4. Insert and tighten screws (and anchors, if used).
4. Insert and tighten screws (and anchors, if used).
Appendices