Bosch Appliances Video Game Controller D9412GV2 User Manual
D9412GV2/D7412GV2 | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2
EN | 85
Bosch Security Systems, Inc. | 10/08 | F01U003636-04
3.1.6 Reporting and Logging
Modem Format must be Yes for the following reports sent to the central station. Regardless of the reporting
format, they log and print at the local printer as shown in Figure 4. Each sub-user is identified by the master
user’s three-digit number plus an extension of 0, 1, 2, or 3. These numbers are called Sub-user ID Codes.
shows all the users for User Group 122 as they would appear.
Modem Format must be Yes for the following reports sent to the central station. Regardless of the reporting
format, they log and print at the local printer as shown in Figure 4. Each sub-user is identified by the master
user’s three-digit number plus an extension of 0, 1, 2, or 3. These numbers are called Sub-user ID Codes.
shows all the users for User Group 122 as they would appear.
Figure 4: User Group 122 Example
Master User:
ID 122
.
♦ CRD ID 122-0
♦ Sub User -1: ID 122-1
♦ Sub User -1: ID 122-1
CRD ID 122-1
♦ Sub User -2: ID 122-2.
CRD ID 122-2
♦ Sub User -3: ID 122-3.
CRD ID 122-3
2
1
1 - User pass code
2 - User token or card
In reporting systems using modem format, all three digits of the User ID Code are transmitted to
the central station with appropriate reports. Central station automation computer systems can
accept only Zonex and Comex style User IDs. Refer to Point/User Flag in Section 2.1 Phone on
page 11.
the central station with appropriate reports. Central station automation computer systems can
accept only Zonex and Comex style User IDs. Refer to Point/User Flag in Section 2.1 Phone on
page 11.
In BFSK, only one number is transmitted. This number represents a group of ten users as shown in Table 30.
Users 100 through 249 do not report in BFSK format.
Users 100 through 249 do not report in BFSK format.
Table 30: BSFK User Code Report
User
Code
000 to 009
User
Code
010 to 019
User
Code
020 to 029
User
Code
030 to 039
User
Code
040 to 049
User
Code
050 to 059
User
Code
060 to 069
User
Code
070 to 079
User
Code
080 to 089
User
Code
090 to 099
BFSK
BFSK
BFSK
BFSK
BFSK
BFSK
BFSK
BFSK
BFSK
BFSK
Report
0
Report
1
Report
2
Report
3
Report
4
Report
5
Report
6
Report
7
Report
Report
8
9
User ###
Default:
001
Selection:
000 or 001 to 249 (001 to 099 for the D7412GV2)
Enter the User number you are programming.
User 000 is the Service Authority Level (Level 15). You cannot change the programming for user
000.
000.
Only the Service Authority Level (User 000) can delete User 000. When a user other than User 000
tries to delete the pass code for User 000, the keypad displays NOT IN USE.
tries to delete the pass code for User 000, the keypad displays NOT IN USE.
User 000 cannot be added or changed at the keypad whether it exists or not.