Bosch Appliances Power Supply PSU-224-DC100 User Manual

Power Supply

Installation | en

Bosch Security Systems

Installation manual

AR18-10-B002 | v1.1 | 2010.02

Connecting the output cables

Connect the two output cables as follows:

–

Cut back the insulation of the cable wires to approximately 

5 mm (0.2 in).

–

Pass the output cables through the supplied grommets. 

–

For each wire, push back the tab behind the terminal with 

a small screwdriver and insert the wire (respect the 

polarity shown in the figure); release the tab to clamp the 

wire in place.

–

Secure the grommets firmly. 

–

Return the protective cover to its position and fasten in 

place with the four cross-head screws. 

Tighten screws firmly to ensure protection against water 

ingress.

5 mm 

(0.2 in)

24 V

24 V

0 V

0 V