Bosch MUZ 4 MX2 User Manual

Page of 12
13
Care and Cleaning
of Bowl and Its Accessories
The mixing bowl, whisks, dough hook,
dough deflector and anti-splash cover are
dishwasher safe.
To facilitate cleaning:
The power unit of the kitchen machine
should be cleaned using a clean, damp
cloth only. Never use coarse or caustic
cleaning products to clean this appliance.
Never immerse the power unit in water.
Blender with Unbreakable Plastic Jar
(MUZ 4 MX2)
 WARNING
1. There is a risk of injury from sharp
blades when using the blender
attachment.
2. Keep hands and utensils out of the
blender jar while it is attached to the
power unit.
3. Blades are sharp. Handle carefully.
4. To avoid injury, never place blade
assembly on power unit without
blender jar properly attached.
5. Always operate the blender with the
cover in place. Always hold the cover
in place when in operation to prevent
the cover from being knocked off.
6. The use of attachments, including
canning jars, not recommended by
the manufacturer, may cause a risk
of personal injury.
7. When blending hot and/or frothing
liquids, process a maximum of 18 fluid
ounces (0.5 litres) at a time.
The MUM 4635 UC, MUM 4620 UC and the
MUM 4420 UC Bosch Compact Series
Kitchen Machines include the MUZ 4 MX2
blender accessory. The blender accessory
consists of, figure 5:
How to Use Blender
The blender has been designed for crushing
ice; mixing liquids; pureeing vegetables;
preparing special diet and infant foods;
pulverizing fruit, vegetables, nuts and dried
bread (for bread crumbs); and preparing
mayonnaise and sauces.
Use of blender
Before beginning to use the blender
attachment, make sure that the power unit
is on a clean, smooth, suitable work
surface and switched to off position, “O/Off,”
and that you have removed the drive cover
from the high-speed drive where the blender
will be placed.
Figure 5.
5a.
Cover closure/funnel
5b.
Cover
5c.
Blender jar
5d.
Blade/base assembly with
gasket and locking ring.
1. Before using the blender for the first
time, it is recommended that the
blender jar cover, closure/funnel and
blade/base assembly, gasket and
locking ring be washed. All
components, except the blade/base
assembly, are dishwasher safe.
Remove the blade/base assembly from
the blender:
First remove the locking ring, as shown
in figure 6a and 6b. Then turn the
blender over so that the base is facing
upward, as shown in figure 7, and
remove the blade assembly by turning