Bogen LUMDMU Installation Instruction
Playing Messages in Sequence
A group or sequence of messages can be played to the output channel.
The maximum number of messages in a sequence can be up to 8
(determined by the DIP switch settings on the back panel). To add
messages to the sequence simply repeat the PLAY command, selecting
the message to be added each time.
The maximum number of messages in a sequence can be up to 8
(determined by the DIP switch settings on the back panel). To add
messages to the sequence simply repeat the PLAY command, selecting
the message to be added each time.
1
2
3
4
5
Press the FUNC button until PLAY is displayed.
PLAY
Press the RUN button.
MSG-01
The first message is displayed.
Press the FUNC button to select a message other
than MSG-01 to play in:
than MSG-01 to play in:
MSG-09
Press RUN to play (and group) the message.
PLY-S09
Ply = Play, S = sequence message #9.
Repeat steps 1 through 4 to add up to 8 messages if
you are configured for 8 (see page 9).
you are configured for 8 (see page 9).
11
NOTE: If a contact closure
comes in on the RJ-21 cable,
the message sequence will
stop. The contact closure
message will play until the
closure is removed. The
sequence message will resume
where it left off.
comes in on the RJ-21 cable,
the message sequence will
stop. The contact closure
message will play until the
closure is removed. The
sequence message will resume
where it left off.