Belkin DECT Portable Station KX-TCA256 User Manual

Troubleshooting

Troubleshooting

Troubleshooting

Problem

Description and Solution

The PS does not work.

• The battery is drained.

• The PS has been cancelled or the PS has not been

registered.
→ Consult your dealer.

• The power is OFF.

→ Turn it ON. (See “Power On/Off” on page 8.)

The PS does not ring.

• Ringer volume is set to “Off”.

→ Adjust the ringer volume level. (See “Ringer Volume

You cannot make/receive a call.

• The PS is out of range or the Cell Station (CS) is busy.

→ Move closer to the CS or try again later.

• The radio channel is busy or a radio communication error

occurred.
→ Try again later.

You cannot dial.

• The number which you dialled is restricted by the

Business Telephone System.
→ Consult your dealer.

• The key lock mode is ON.

→ To cancel the mode, press the joystick for about 2 seconds.

• The radio channel is busy or a radio communication error

occurred.
→ Try again later.

Noise is frequently heard.

→ Set the PS and CS away from other electrical appliances.
→ Move closer to the CS.

“CS Busy” is displayed.

• The Cell Station is busy.

→ Try again later.

“PS Not Connected” is
displayed.

• The called PS is out of range or is not turned on.

→ Try again later.

The PS stops working during
operation.

→ Turn the PS off, then turn it back on. (See “Power On/Off”

→ Reinsert the battery and try again. (See “Battery

Two short beeps are heard
during a conversation.

• The radio signal is weak.

→ Move closer to the CS.