Beko Appliance Trim Kit Refrigerator User Manual

1 = Lowest cooling setting (Warmest setting)

(Coldest setting)

(Or)

Min. = Lowest cooling setting 
(Warmest setting)

(Coldest setting)

The average temperature inside the fridge 
should be around +5°C.
Please choose the setting according to the 
desired temperature.
You can stop operation of your device by 
adjusting the thermostat knob to “0” position.

Please note that there will be different 
temperatures in the cooling area.
The coldest region is immediately above the 
vegetable compartment.

The interior temperature also depends on 
ambient temperature, the frequency with which 
the door is opened and the amount of foods 
kept inside.    
Frequently opening the door causes the interior 
temperature to rise.
For this reason, it is recommended to close 
the door again as soon as possible after use.

The operating temperature is regulated by the 

temperature control.

Before you begin operating your device, the 
following points should be re-checked for 
safety:

• Is the device standing properly on the floor?
• Is there sufficient space for good air 
circulation?
• 

Is the interior clean

?

 (Also see the section   

 “Cleaning and care”)

•  Set the thermostat knob half way between 
1 and 5 or Min. and Max.
• Now connect the device to the mains.

The compressor is turned on; the interior light 
comes on when the door is opened.

Do not place foodstuff into the refrigerator until 
the temperature has reached the desired level.

4

Warm

Cold

1        2       3        4       5

(Or) Min.

Max.