Barracuda Networks VERSION SP4 User Manual
193 Barracuda NG Network Access Client - Administrator’s Guide
14.3.8
Re-authentication by the client service
The client service is able to enforce a re-authentication, given the configured interval (see 2.0.A),
independent of the switch's configuration. After the configured amount of seconds elapsed the Client
service will start the authentication sequence. By sending a EAPOL Start packet (see: 2.3.I) and
waiting for the identity request starting the authentication sequence (see: 2.3.II).
independent of the switch's configuration. After the configured amount of seconds elapsed the Client
service will start the authentication sequence. By sending a EAPOL Start packet (see: 2.3.I) and
waiting for the identity request starting the authentication sequence (see: 2.3.II).
14.3.9
Periodic client re-authentication by the switch
You can enable periodic 802.1X client re-authentication and specify how often it occurs. If you do not
specify a time period before enabling re-authentication, the number of seconds between
re-authentication attempts is 3600 (1 hour). This option must be changed either through a command
line interface on the switch or the web interface.
specify a time period before enabling re-authentication, the number of seconds between
re-authentication attempts is 3600 (1 hour). This option must be changed either through a command
line interface on the switch or the web interface.
Beginning in privileged EXEC mode, follow these steps to enable periodic re-authentication of the
client and to configure the number of seconds between re-authentication attempts.
client and to configure the number of seconds between re-authentication attempts.
Commands:
•
configure terminal
Enter global configuration mode
•
interface <interface-id>
Specify the port to be configured, and enter interface configuration mode
•
dot1x re-authentication
Enable periodic re-authentication of the client, which is disabled by default.
•
dot1x timeout reauth-period <seconds>
Set the number of seconds between re-authentication attempts.
The range is 1 to 65535; the default is 3600 seconds.
This command affects the behavior of the switch only if the periodic re-authentication is en-
abled.
abled.
•
end
Return to privileged EXEC mode.
•
show dot1x interface
Verify your entries
Table 14–10
Registry entry for 802.1X authentication
Item
Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
Key
8021XReAuthPeriod
Value
Desired number of seconds the "Client" service must wait until re-authentication (Default 3600 seconds)
• 0 - 4294967295
Changes of this value will take effect with the next health evaluation by the Barracuda NG Access Monitor service
.