Barco Laser Pointer 26-0405000-00 User Manual
96
PresentationPRO-II • User’s Guide
5. System Setup
Setting up the DSK
pÉííáåÖ=ìé=íÜÉ=aph
With PresentationPRO-II, you can use the DVI input or a still frame as the DSK source.
You can also change which source you use for the DSK during the course of a live
production — provided that the DSK has been properly set up.
You can also change which source you use for the DSK during the course of a live
production — provided that the DSK has been properly set up.
Select the procedure below for the type of DSK that you wish to set up:
•
•
rëáåÖ=íÜÉ=asf=fåéìí=~ë=íÜÉ=aph
This procedure enables you to set up the DVI source as the DSK’s input type. It is
recommended that you perform these steps as a setup procedure. However, once the
DSK is set up, during live production you can switch it between a captured still frame and
the DVI source.
recommended that you perform these steps as a setup procedure. However, once the
DSK is set up, during live production you can switch it between a captured still frame and
the DVI source.
Use the following steps to set up the DVI input as your DSK source:
1. Ensure that the PresentationPRO-II EDID is properly programmed. Refer to the
“
” section on page 93 for instructions.
2. If you have not already set up the BG/DSK input as a DVI source, follow the setup
procedure as outlined in the “
” section
3. In the Layer Functions Section, press BG/DSK. The button blinks and the BG/
DSK Input Setup Menu appears.
4. Scroll to the Mode line and select DSK.
5. Scroll to the Type line and select DVI.
6. Press {KEY} to display the DSK Adjustment Menu.
7. Adjust key parameters as required. In Chapter 4, refer to the “
” section on page 78 for details.
Note
Remember that the
BG/DSK input is shared between BG and
DSK. If you elect to use a “live” DVI input as the background,
it cannot be used as the DSK simultaneously.
it cannot be used as the DSK simultaneously.