Barco Laser Pointer 26-0405000-00 User Manual

Working with Layers

The following topics are discussed in this section:

With PresentationPRO-II, you can perform the following types of PIP transitions:

„

Use the following steps to transition a PIP to Program:  

1.  Ensure that you have preset the desired transition type and rate.  Refer to the 

"

" section on page 115 for details.

2.  In the Layer Functions Section, ensure that the PIP button is blinking.  If not, 

press 

PIP to display the PIP Adjustment Menu.  Please note:

If there is no source on Program, the last source associated with the PIP 
will blink on the 

Source Selection Bus. 

If there is a source currently on Program, it will be lit solid on the 

Selection Bus. 

3.  On the Source Selection Bus, select a new source.  The button blinks to indicate 

that the source is "pending."  

If there is no source on Program, only the pending source will blink.

If there is a source currently on Program, the pending source will blink 
and the current source will be lit solid.  

4.  In the Layer Functions Section, press TRANS.  The current PIP transitions off, 

the new PIP transitions on, and the 

TRANS button lights during the interval.  

From this point forward, transitioning a PIP is a simple two-
button sequence:  (1) select source, (2) press 

TRANS.