Bags and Gloves E-9220T User Manual
41
www.gateway.com
Installing drives
Installing or replacing a hard drive
Use these instructions to install or replace a hard drive.
To install a hard drive in an internal drive bay:
1
Follow the instructions in
.
2
Follow the instructions in
3
If you are replacing a drive, go to
- OR -
If you are adding a new drive to an available drive bay, slide the green drive retainer
lever toward the front of the drive bay, then go to
lever toward the front of the drive bay, then go to
.
4
Disconnect the old drive’s cables from the front of the drive.
5
Slide the green drive retainer lever toward the front of the drive bay, then pull the
drive out of the bay.
drive out of the bay.
6
Set any jumpers on the new drive. See the drive’s documentation for further
instructions.
instructions.
Important
To install a hard drive in the bottom external 3.5-inch drive bay, follow
the instructions in
the instructions in
.
Drive retainer
lever
lever